全国服务热线:

18396804865 钱经理

等离子切割机电源上调整的参数

2019-12-21 16:26:43 文章来源: 338

   在数控等离子切割机电源上调整的参数有:
  The parameters adjusted in the power supply of CNC plasma cutting machine are as follows:
  (1)电流:手动旋扭给定(2)PG1引弧气气压及流量:
  (1) Current: Manual twisting given (2) PG1 arcing gas pressure and flow:
  (3)PG2切割气气压及流量:
  (3) Gas pressure and flow rate of PG2 cutting:
  (4)WG1涡流气气压及流量:
  (4) WG1 swirl gas pressure and flow rate:
  (5)WG2涡流气气压及流量:
  (5) WG2 swirl gas pressure and flow rate:
  (6)板厚档位:共3个档位,根据参数表设定。
  (6) Plate Thickness Gear: There are 3 Gears, which are set according to the parameter table.
  参数有:
  The parameters are:
  (1)引弧时间:即穿孔时间,通过键盘直接输入;(2)切割速度:通过键盘直接输入;(3)割缝补偿:通过键盘直接输入;(4)引弧高度:即穿孔高度,在割枪部位手动调节;(5)弧压:在弧压传感器上手动调整,该值决定割枪的切割高度。在切割过程中调整时,观察等离子电源上弧压显示值直到与参数表上的值匹配为止。
  (1) arc initiation time: that is, the time of perforation is input directly through keyboard; (2) cutting speed: input directly through keyboard; (3) slot compensation: input directly through keyboard; (4) arc initiation height: that is, the height of perforation, which is manually adjusted at the cutting gun position; (5) arc pressure: manually adjusted on the arc pressure sensor, which determines the value. Cutting height of cutting gun. When adjusting during cutting, the display value of arc voltage on plasma power supply is observed until it matches the value on parameter table.
 

  济南卓然天成是大型数控火焰切割机厂家,数控等离子切割机厂家,便携式数控切割机厂家,供应河北数控火焰切割机,山西数控等离子切割机,辽宁便携式数控切割机,吉林数控火焰切割机,黑龙江数控等离子切割机,江苏数控切割机,浙江数控切割机,安徽数控切割机,福建切割机,江西切割机,山东数控切割机,台湾切割机,河南切割机,湖北数控切割机,湖南数控切割机,广东切割机,海南数控切割机,四川数控切割机,贵州数控切割机,云南切割机,陕西切割机,甘肃数控切割机,青海数控切割机,需要的朋友联系我们15254176866

电话咨询
邮件咨询
在线地图
QQ客服
网站地图